Add and Enable Virtual Keypad (US) (PC) mode - It will display both Alphabets and Numbers on the Keypad
Add and Enable Virtual Keypad (US) (PC) mode
This article helps you learn how to add and enable Enable Virtual Keypad (US) (PC) mode on your Ejeton Dual Screen Franpos Device.
Once you do this It will start to display both Alphabets and Numbers on the Keypad like in the picture below
Steps to follow
Related Articles
Customer Display Ad
Before you can use the Customer Display to display your ads, you need to start setting it up in your back office. Please note: The customer display is controlled by the corporate/main account. Customer Display Info In your Back Office, please go to ...Customer Display Setup
In this article, you will learn how to Enable/Disable Customer display plus with additional features to show on your customer display. Note: If you're using Stand-alone Android Devices, make sure you download the Customer Display applications from ...Set up of ICT250 Semi-Integrated Pin-pad
Before connecting, please make sure that the device matches the following information: SDK Version: 9.26.2 OS Version: 4614 App Version: 0604 You can find out about this as follows. Press the .,#* button Enter the password Go to the Terminal info ...Customer Display installation
Installation with Franpos Customer Display: In order to use the Franpos provided Customer Display, you need to prepare your ICR for the Customer Display, please follow these instructions. 1. Go to the Settings of your ICR and tap on "Security" 2. ...Add/Delete Employees
In this training, we will learn how to add employees to your store at Franpos Note: Before you add an employee, we recommend that you’ll set the access permissions in the system (at Advanced settings>>Access Permissions) and decide which access ...