Capture signature on Pin-Pad
In order to capture a signature on your Pin-Pad or to not capture signatures on your Register, please follow the steps below:
1. Press on "Settings" in your Register App
2. Tap on "Devices"
3. Tap on "Pin pad settings"
4. Enable "Capture signature"
Please also make sure to turn off "Capture Signature and tips on this device" under Features.
This will prompt customers to sign when swiping a card.
Retail - Capture signature on Customer Display
In order to capture a signature on your Customer Display or to capture signatures on your Register, please follow the steps below: Pre-requisite:- Login at Back office using my.franpos.com > Dashboard > Settings > Customer Display "Enable signature" ...
VX 805 Pin Pad Setup
Plug your Ethernet cable from the wifi router into the Pin-Pad cable (ETH). Then plug your power cord into the Pin-Pad Cord. Write down the IP Address that shows up on the Pin-Pad screen during Boot-up. Go into iConnect iPad app > My Company > ...
Pax pin-pad auto registration (Broadpos)
Franpos has released the new feature: “PAX terminal: entering terminal SN in ICR settings allows to find terminal's new IP automatically. Requires "POS Auto-Register" option activated on BroadPOS portal” Here are the instructions on how to handle ...
Set up of ICT250 Semi-Integrated Pin-pad
Before connecting, please make sure that the device matches the following information: SDK Version: 9.26.2 OS Version: 4614 App Version: 0604 You can find out about this as follows. Press the .,#* button Enter the password P(7+F)123456 or CPS2468 Go ...
Login to FranpPos App and Tap the ‘Self-Checkout’ Button A New screen will appear, this will be the check in the screen that the customer will use upon arrival to the register Next step is you select ‘Account’ a pop notification will appear where you ...