Change Pin

Change Pin

  1. Login to FranpPos App and Tap the ‘Self-Checkout’ Button
  2. A New screen will appear, this will be the check in the screen that the customer will use upon arrival to the register
  3. Next step is you select ‘Account’ a pop notification will appear where you can ‘Change Pin’.

                       Self_Checkout-_Account_-_Change_pin_.png

4.Another page will appear where you enter ‘Cell Phone, your’ Previous Pin’ you created and the ‘New Pin’ you want to use.

                      Self_Checkout-_Account-_Change_Pin_1.png

5. An Notification Box will appear which confirms its ‘Successfully updated’. Warning! You will also Receive Notification to your ‘Cell Phone’ for New Pin you have Created.

                     Self_Checkout-_Account-_Change_Pin_-_2.png

 

 

 

 

    • Related Articles

    • Set up of ICT250 Semi-Integrated Pin-pad

      Before connecting, please make sure that the device matches the following information: SDK Version: 9.26.2 OS Version: 4614 App Version: 0604 You can find out about this as follows. Press the .,#* button Enter the password Go to the Terminal info ...

    • Forgot Pin?

      Login to FranPos App and Tap the ‘Self-Checkout’ Button A New screen will appear, this will be the check on the screen that the customer will use upon arrival to the register Next step is you select ‘Account’ a pop notification will appear where you ...

    • Franpos Price change

      iConnect plans and pricing may occasionally be adjusted as we add more features and functionalities, introduce new apps, and find other ways to improve the experience. We may also adjust plans and pricing to respond to local market changes, such as ...

    • VX 805 Pin Pad Setup

          Plug your Ethernet cable from the wifi router into the Pin-Pad cable (ETH). Then plug your power cord into the Pin-Pad Cord. Write down the IP Address that shows up on the Pin-Pad screen during Boot-up. Go into iConnect iPad app > My Company > ...

    • Capture signature on Pin-Pad

      In order to capture a signature on your Pin-Pad or to not capture signatures on your Register, please follow the steps below:   1. Press on "Settings" in your Register App 2. Tap on "Devices" 3. Tap on "Pin pad settings"   4. Enable "Capture ...