Connecting Ingenico iCT250 to Android Register
Confirming Terminal info
Step 1
Before connecting, please make sure that the device matches the following information:
- SDK Version: 9.26.2
- OS Version: 4614
- App Version: 0604
You can find out about this as follows.
- Press the .,#* button
- Enter the Manager Password.
- Go to the Terminal info Menu or press "7"
- Press 1 or Terminal info
Connecting the Franpos Register to the iCT250
Step 2 - Go into the iCT250 Settings to find the IP Address
- Press the .,#* button
- Enter the password
- Go to Setup Menu or press "3"
- Enter the password
- Go to Communications or press "2"
- Select Ethernet or press "3"
- Press Current setup or press "1"
- You will see the IP Type: Dynamic/Static and the IP ADDRESS
Step 3 - Go into the iCT250 Settings to find/enter the PORT
- Press the .,#* button
- Enter the password
- Go to Misc. Options or press "9"
- Select Semi-Integrated or press "1"
- Select Communication-Type or press "2"
- Select Ethernet or press "3"
- Enter port 9999 or 1433
Step 4 - Match that IP ADDRESS from the iCT250 to the IP ADDRESS of the Franpos Register
- On the Franpos Register
- Select Settings on the left-hand side menu
- Select Devices
- Select Pin Pad Settings
- If the port (Step 3) matches, press "Scan Network" or manually enter the IP address. The IP will be 192.168.0.x
- Make sure to match this IP Address to the IP ADDRESS from the iCT250
Step 5 - Match the PORT from the iCT250 to the PORT of the Franpos Register
- On the Franpos Register
- Select Settings on the left-hand side menu
- Select Devices
- Select Pin Pad Settings
- The Port should be matching your terminal settings i.a. 9999 or 1433
- Press Test connection or run a transaction
Is required to activate the integration. TLM:none:none
Related Articles
Re-install app (Android)
Press the Sync Button on your Android Register to make sure no data is lost. Please close your franpos app and open the Updater app. If you don't have it, please download it at https://apps.franpos.com (This applies to the franpos register only, not ...
ELO POS - Change to Android mode
The Register is enabled with EloView as a factory default. If you would like to work in Android Desktop mode, you can: • Enter EloView Control Panel by pressing Home and Power buttons together on the underside of the screen • When prompted for a ...
Download/Update & Install the Register Application to the latest Version On An Android Tablet ( POS )
Steps to Update or Download and Install the Register Application to the latest Version On An Android Tablet ( POS ) There are two different ways to do this. Process 1 - 1. Please verify the Current Version your register application is on. 2. In order ...
Connecting the Magstripe Card Reader To Franpos Register.
· The magstripe card reader will attach on the right side of the Franpos register. · Slide the USB cover off the side of the Franpos register. · Take the USB Magstripe card reader and insert it in to the USB Port. It should ...
Restart Register Application
Restart Register Application This article helps you learn how to restart the Register application when needed