Connecting the Magstripe Card Reader To Franpos Register.

      ·       The magstripe card reader will attach on the right side of the Franpos register.

·       Slide the USB cover off the side of the Franpos register.

·       Take the USB Magstripe card reader and insert it in to the USB Port. It should snap in. 

• Related Articles

• Set up Square Chip Card Reader

  The Square chip card reader has two slots – one for swiping magstripe cards and one for inserting chip cards. This reader can only be used with tablets that have an audio jack and cannot be used with the Franpos Register. Note: If you have the ...

• Ports On the Franpos Register ( EJETON Dual Screen )

  Ports On the Franpos Register ( EJETON Dual Screen ) 1. Power - To Connect the Power Cable of the POS Machine 2. Ethernet - To Connect the Ethernet Cable ( Internet Cable ) 3. USB Ports - To Connect the Scanner etc.

• Gift Card ( Franpos Built In(Virtual) vs Plastic Gift Cards ) - Sell/Redeem on POS, Check Franpos Gift Card Balance

  Gift Card ( Franpos Built In(Virtual) vs Plastic Gift Cards ) - Sell/Redeem on POS, Check Franpos Gift Card Balance In this article you will learn the difference between Franpos Built In Gift Cards vs Store Custom Gift Cards, how to Sell and Redeem ...

• Card on File ( Tokenization )

  Card on File ( Tokenization ) This article helps you learn how to Enable Tokenization in back office and how to add card on file under customer profile ( Register application & Back office ). 1. Please login to back office and follow the instructions ...

• Connecting Ingenico iCT250 to Android Register

  Confirming Terminal info Step 1 Before connecting, please make sure that the device matches the following information: SDK Version: 9.26.2 OS Version: 4614 App Version: 0604 You can find out about this as follows. Press the .,#* button Enter the ...