Detecto Scale - Set-up

Detecto Scale - Set-up

In this article, you will learn how to set up your Detecto scale using franpos register.

- Follow this link to set-up your Detecto with Franpos: https://www.dropbox.com/s/9zpq1kv2g3sqyox/Detecto_scale_setup.mp4

 

 

 

    • Related Articles

    • Cas scale set-up

      In order to use a new CAS scale with Franpos, please follow the steps below.   Change ECR type setting in CAS scale to Type 5 (image of CAS manual below): Using power switch on the side, turn the scale off, press “# or T" key on the display ...
    • Detecto scale units mismatch

      When you see the error message "Units mismatch" on your Register, please make sure to check which measurement was selected under the product.    If your scale is set to "lb", please make sure to select "lb" under the product you are trying to sell.  ...
    • How to change units on the Detecto scale

      This article describes how to switch the Detecto scale units from lb to kg:   Initial Setup: 1. Enter the Setup Mode by pressing calibration switch on the back of the scale with a thin object. 2. Scale screen should display word "Type". 3. Press Unit ...
    • Retail - Price embedded barcode

      In this training, you will learn how price-embedded barcodes for weight-based products works for your retail and quick service restaurant store. Pre-acquisition:-  Dashboard > Settings > Company Settings > Additional Settings > Unit of Measurement as ...
    • Unit of Measurement

      In this training, you will learn how to enable scale to use for your company. In your Backoffice, go to Company Settings and the Tab "Additional Settings", Scroll to the bottom and find "Enable Bundles/Prepaid packages", and Enable "Units of ...