Register Sync

Register Sync

In order to sync transactions and customer information to other devices, the system will need to sync. The system will automatically sync every 15 minutes. Additionally, you can manually prompt it to sync the most current information at any time by doing the following:

  1. Press the 'Sync' 
  2. Shows all syncs on process until it completes 

sync_-_1.png

    • Related Articles

    • QSR Drive Thru Sync Register Set up

      Follow the steps below to enable local sync communication between your DT registers.  Local sync should be turned off and kept off at front of house registers. Steps on DT1 (drawer side): On register go to Settings > Devices > Local Sync Server Turn ...
    • Force Restart Register Application ( Kill The Register Application and Re open )

      In this Article you will learn how to Force Restart Register Application ( Kill the Register Application and Re open 1. To close the application, click on the square button shown in the picture below. If you're using an older model of our POS, you'll ...
    • Local Sync orders not communicating between registers

      Steps to fix orders not appearing on Hold 1.     ON SERVER SIDE: o   SELECT (i) o   SELECT RESTART o   WAIT 30 SECONDS   2.     ON CLIENT SIDE: o   SELECT (i) o   SELECT RESTART   3.     ON CLIENT SIDE (IF NECESSARY) o   SELECT SETTINGS o   SELECT ...
    • Restart Register Application

      Restart Register Application This article helps you learn how to restart the Register application when needed
    • Send LOGS ( Register APP )

      Send LOGS ( Register APP ) This article helps you learn how to send logs from the POS Register app to Franpos Team when needed. Logs helps Franpos Team to investigate the issue.