Franpos Dual Screen POS Hardware Setup

Franpos Dual Screen POS Hardware Setup

Franpos Dual Screen POS Hardware Setup

In this article you will learn how to setup the Franpos Dual Screen POS.


Please click on this You Tube link below



Picture of Ports behind the Employee Screen



SETUP PROCESS


Please take the time and patience to start the setup process. The entire process should not take more than 30 minutes to complete.

  • No tools will be needed.
  • Please handle all accessories and peripherals with care, they are delicate equipment.
  • You will need an electrical outlet (6 outlets will be required) if you do not have availability, you must use an extension with surge protection.
  • You will need an internet outlet from your modem or router (RJ-45 Ethernet).
  • Clean an area of your counter to start the installation.
  • Open the boxes carefully and check if the content received is the same as described above.
  • Separate each component and check its contents.
  • Please read the assembly diagram below for details.
  • Make sure you have the complete contents of accessories and peripherals, and that the installation diagram is well understood.
  • Now call Franpos support, they will help you with the assembly step-by-step and subsequent configuration. Phone: (408) 898-3217 / Ext 2
  • Start assembly from the POS.
  • Follow the Support Team instructions for assembly with each peripheral paying close attention to the assembly guide.
  • Do all the necessary updates and tests along with the Support Theme to ensure that all your equipment is correctly installed, configured and ready to use.

    • Related Articles

    • Ports On the Franpos Register ( EJETON Dual Screen )

      Ports On the Franpos Register ( EJETON Dual Screen ) 1. Power - To Connect the Power Cable of the POS Machine 2. Ethernet - To Connect the Ethernet Cable ( Internet Cable ) 3. USB Ports - To Connect the Scanner etc.
    • Scanner setup inside the Register App

      In this article, you will learn how to set up your USB or wireless scanner inside the Register app. By default, the barcode you scan will be inputted into the search bar in the Register. With this setup, the items will be added to the cart ...
    • Operating System Update On Ejeton ( White Dual Screen ) FRANPOS Device

      Operating System Update On Ejeton ( White Dual Screen ) FRANPOS Device In the recent times few Franpos White Dual Screen Tablets started opening browser all of sudden . This was happening  if the tablet is idle / restarted for any reason etc. It ...
    • PAX A35 (Credit/Debit Machine) Setup & Connection with Franpos Register

      PAX A35 (Credit/Debit Machine) Setup & Connection with Franpos Register This article helps you learn how to setup PAX A35 with Franpos Register Please unbox and connect the Power Cable to PAX A35 . Power it ON. Please call Franpos Support at ...
    • Hard Restart (Ejeton Dual Screen POS)

      Hard Restart This article helps you learn how to perform a Hard Restart on the Ejeton Dual Screen POS Please press and hold both the Home button (located at the bottom center of the Employee screen) and the Power button (located at the bottom right ...