Hard Restart (Ejeton Dual Screen POS)

Hard Restart (Ejeton Dual Screen POS)

Hard Restart

This article helps you learn how to perform a Hard Restart on the Ejeton Dual Screen POS

Please press and hold both the Home button (located at the bottom center of the Employee screen) and the Power button (located at the bottom right corner beneath the Employee screen) simultaneously until the system shuts down completely.



FYI -When you start pressing both buttons together, the POS will display a message saying "Power off/Restart." Please disregard this message and keep pressing both buttons until the POS turns off on its own.




Once the POS is completely off, press the power button to turn it back on.

    • Related Articles

    • Operating System Update On Ejeton ( White Dual Screen ) FRANPOS Device

      Operating System Update On Ejeton ( White Dual Screen ) FRANPOS Device In the recent times few Franpos White Dual Screen Tablets started opening browser all of sudden . This was happening  if the tablet is idle / restarted for any reason etc. It ...

    • Franpos Dual Screen POS Hardware Setup

      Franpos Dual Screen POS Hardware Setup In this article you will learn how to setup the Franpos Dual Screen POS. Franpos Dual Screen POS Hardware Setup Please click on this You Tube link below https://www.youtube.com/watch?v=ubxUohhpveU Picture of ...

    • Restart Register Application

      Restart Register Application This article helps you learn how to restart the Register application when needed

    • Receipt Printer Not Printing & Cash Drawer Not Opening On Ejeton POS

      If your Receipt Printer Is Not Printing & Cash Drawer Not Opening same time On Ejeton POS please follow these steps. 1. Please make sure there are three cables connected to your receipt printer ( Seiko II or Franpos White Receipt Printer ) a. Power ...

    • Force Restart Register Application ( Kill The Register Application and Re open )

      In this Article you will learn how to Force Restart Register Application ( Kill the Register Application and Re open 1. To close the application, click on the square button shown in the picture below. If you're using an older model of our POS, you'll ...