ICR can't find built-in printer

ICR can't find built-in printer

When the ICR can't find the built-in Printer, we suggest that you remove the back of your ICR, unplug all USB cables and restart your device. After that, please start your device and plug in the USB cables again.

    • Related Articles

    • Receipt Printer Not Printing & Cash Drawer Not Opening On Ejeton POS

      If your Receipt Printer Is Not Printing & Cash Drawer Not Opening same time On Ejeton POS please follow these steps. 1. Please make sure there are three cables connected to your receipt printer ( Seiko II or Franpos White Receipt Printer ) a. Power ...
    • No Power to ICR register

      Hold the power button down for 5 to 10 seconds and the Green LED printer light should come on. If it does not power on, please check if it is plugged in correctly. Plug it into a surge protector, not directly into a wall outlet. Not plugging it in a ...
    • Pax S300/ICR Hardware Setup

      Connecting ICR #1 to PAX #1 Go into the PAX #1 Settings to find the IP Address Select Menu/Function+1 Enter the password 1234, hit the GREEN enter button Arrow down once Select Communications Enter the password 1234, hit the GREEN enter button Arrow ...
    • Set time on ICR

      1. Drag down time bar from left-upper corner on ICR  2. In order to open time menu press on clock itself 3. Set time, date, timezone, date format (Regional). See screenshots.       
    • Installation Guide for Mini PC to get ready for ICR (Kiosk)

        1. CX25.ocx - Open CMD Prompt with Admin rights and Execute Regsvr32 to Register the ocx file. Change the current Directory to folder containing the actual OCX file and Then Execute Command. 2. Copy ""Config and test160-021_Rev 1.16.08 V3" Folder ...