Increase the font size ICR Register

Increase the font size ICR Register

This applies only to customer's using the Franpos register. In case you feel like the font is too small, you can increase it by adjusting it in the Android settings. 

1. Close the register app

2. Go to Settings. 2018-04-23_1103.png

3. Tap on Display 2018-04-23_1104.png

4. Find Font Size and increase it to Huge.

2018-04-23_1105.png

Before:

2018-04-23_1101.png

After:

2018-04-23_1106.png

    • Related Articles

    • No Power to ICR register

      Hold the power button down for 5 to 10 seconds and the Green LED printer light should come on. If it does not power on, please check if it is plugged in correctly. Plug it into a surge protector, not directly into a wall outlet. Not plugging it in a ...
    • Pax S300/ICR Hardware Setup

      Connecting ICR #1 to PAX #1 Go into the PAX #1 Settings to find the IP Address Select Menu/Function+1 Enter the password 1234, hit the GREEN enter button Arrow down once Select Communications Enter the password 1234, hit the GREEN enter button Arrow ...
    • Reinstall Register app

      In this article, you will learn how to reinstall register app for your store. Press the 'Home' Button on the register tab Press the '6 Dots with a circle' until you see main register screen Find the 'ICR Updater app" Once you open the 'ICR updater ...
    • Set time on ICR

      1. Drag down time bar from left-upper corner on ICR  2. In order to open time menu press on clock itself 3. Set time, date, timezone, date format (Regional). See screenshots.       
    • Installation Guide for Mini PC to get ready for ICR (Kiosk)

        1. CX25.ocx - Open CMD Prompt with Admin rights and Execute Regsvr32 to Register the ocx file. Change the current Directory to folder containing the actual OCX file and Then Execute Command. 2. Copy ""Config and test160-021_Rev 1.16.08 V3" Folder ...