Kitchen Display (KDS) Initial Setup

Kitchen Display (KDS) Initial Setup

In this training, you will learn how to use Register and Kitchen display application for a restaurant.

Note: Before starting Kitchen display please download the Kitchen display app from https://apps.franpos.com/ from your kitchen devices browser.

  1. Login to your FOH register, Press ‘Settings'
  2. Select ‘Devices’
  3. Press ‘Kitchen Display devices’
  4. Start the server
  5. Turn on Live updates

Kitchen_display_-_1_001.png     

      6. Check your Kitchen display IP Address once the server has started

      7. Open up your Kitchen Display application on your android system

      8. Allow display application to find register server

      8. Verify IP address of register is correct and Connect

      9. If you don’t see your IP Address from the Register try to press reconnect.

    10. Return to  the Register and select an item

    11. The item that was rung in should now appear on your kitchen display device

 

 

Please note: You can remove orders from the KDS by pressing and holding the order box:

2019-06-24_1405.png

 


    • Related Articles

    • Customer Display Setup

      In this article, you will learn how to Enable/Disable Customer display plus with additional features to show on your customer display. Note: If you're using Stand-alone Android Devices, make sure you download the Customer Display applications ...

    • Square Terminal setup

      Square Terminal + Franpos Register Setup Instructions: Re-authenticate Square account in Franpos Backoffice to enable Terminal management permissions: Go to Settings > Payment methods > Square Tap “Remove access” to deauthorize previously ...

    • Material Setup

      Material Setup Materials allow users to build a Bill of Material for products that are sold.  To set up materials, please follow the steps below –  Setup Stock Units -  In your back office, go to settings > stock units Select the “+” button Fill out ...

    • Ingredient Setup

      Ingredient Setup Ingredients allow users to build a recipe for food items that are sold.  To set up ingredients, please follow the steps below –  Setup Stock Units -  In your back office, go to settings > stock units Select the “+” button Fill out ...

    • Target Labor Setup

      Adding a target labor percentage will display a target labor cost on the Dashboard 1. Proceed to https://my.franpos.com 2. Go to Settings > Company Settings > Additional Settings 3. Setup Target Labor cost percentage (up to 2 decimal pts.) under ...