PAX S300 Close Batch

PAX S300 Close Batch

In this article, you will learn how to close batch using franpos and Pax s300.

  1. Hold down the blue function key while simultaneously pressing the 1 key.
  2. The terminal will prompt you to enter in the device’s password.
  3. Type in the password. ( 1234 and Enter button ). If the password do not work please try today's date as the password in this format (mmddyyyy) .
  4. Press the green enter key.
  5. Select Hosts Settings.
  6. Type in the password again.
  7. Press green enter key.
  8. Select the down arrow to get to the Batch Close option.
  9. Select Batch Close.

Video Tutorial 


    • Related Articles

    • Close Batch on PAX A35

      Tap the four corners in the sequence shown in the image below. Enter today’s date in MMDDYYYY format as the password, then click Enter. Swipe up on the screen with your finger until you locate 'Batch Close'. Click on Batch Close

    • Pax s300 Store&Forward

      1. Introduction Terminals can store transactions in Save-And-Forward (SAF) queue when the host is not available. The Store and Forward feature--dependent on parameters that define when to store and when to upload transactions, as well as individual ...

    • Pax/s300 Set Batch time

      This Article will help adjust the batch time, in case the PAX (s300) batches multiple times a day.   On your device, select:   1. Main Menu 2. Merchant settings 3. Set Batch time

    • Auto-Recovery Methods for PAX Payment Terminals

      Auto-Recovery Methods for PAX Payment Terminals PAX terminals connected over LAN may receive a new IP address from the network. When this happens, the POS must reconnect automatically to avoid payment interruptions. Franpos provides three ...

    • PAX A35 (Credit/Debit Machine) Enabling Self Register

      This article guides you through how to enable Self-Register option in the Host Settings for PAX A35. To start, please open the payment application (TransIT or Rapid Connect) on your PAX A35. On the idle screen (blue background with PAX logo) press on ...