Pax S300/ICR Hardware Setup

Pax S300/ICR Hardware Setup

Connecting ICR #1 to PAX #1

Go into the PAX #1 Settings to find the IP Address

  • Select Menu/Function+1
  • Enter the password 1234, hit the GREEN enter button
  • Arrow down once
  • Select Communications
  • Enter the password 1234, hit the GREEN enter button
  • Arrow down once more
  • Select LAN parameters
  • Select IP ADDRESS

Match that IP ADDRESS from PAX #1 to IP ADDRESS in ICR #1 Settings

  • On ICR register
  • Select Settings on the left-hand side menu 
  • Select Devices
  • Select Pin Pad Settings
  • The IP address will be 192.168.0.x
  • Hit the Scan Network button to get an IP ADDRESS
  • Make sure to match this IP Address to IP ADDRESS from PAX
  • Test connection

 

 

 

 

Connecting the Franpos Register to the PAX s300

Go into the PAX #2 Settings to find the IP Address

  • Select Menu
  • Enter the password 1234, hit GREEN enter button
  • Arrow down once
  • Select Communications
  • Arrow down once more
  • Select LAN parameters
  • Select IP ADDRESS

Match that IP ADDRESS from PAX #2 to IP ADDRESS in ICR #2 Settings

  • On ICR register
  • Select Setting on the right-hand side menu items
  • Select Peripheral Devices
  • Select Pin Pad Settings
  • IP address will be 192.168.0.x
  • Hit the Refresh button to get an IP ADDRESS
  • This might be the IP Address from PAX #1, that’s ok you can change it to the correct IP Address
  • Make sure to match this IP Address to IP ADDRESS from PAX #2 and select "Set this IP as Static"
  • Test connection

 

 

PX:none:none required to activate the integration. 

    • Related Articles

    • Set-up of PAX S300

      Connecting the PAX S300 Pin-Pad Watch the video to get an idea of the installation instructions. Not all connections will be exactly as described in the video. Note Your locations will only need to use the LAN (ethernet) cable connection mentioned in ...
    • Pax D200 Setup

      This article describes the steps on how to set up the Pax D200 Mobile Pin-Pad. For more information, please also check the D200 Manual https://paxfaqs.files.wordpress.com/2014/03/d200-users-manual-v1-00-00.pdf   When you first turn on your Pax D200 ...
    • PAX S300 Close Batch

      In this article, you will learn how to close batch using franpos and Pax s300. Hold down the blue function key while simultaneously pressing the 1 key. The terminal will prompt you to enter in the device’s password. Enter in the password. Press the ...
    • Walk-in setup (iOS)

        Your POS system connects with our customer facing check-in module. The check-in module allows customers to check themselves into the service queue using the iPad kiosk. For example, your POS station (i.e. iPad cash register) will be in the back of ...
    • Installation Guide for Mini PC to get ready for ICR (Kiosk)

        1. CX25.ocx - Open CMD Prompt with Admin rights and Execute Regsvr32 to Register the ocx file. Change the current Directory to folder containing the actual OCX file and Then Execute Command. 2. Copy ""Config and test160-021_Rev 1.16.08 V3" Folder ...