Sanitization Guide for PAX Terminals

Sanitization Guide for PAX Terminals



We're sharing the necessary steps to take in keeping your PAX terminal sanitized, with the purpose of minimizing the spread of bacteria and other germs.

Follow the 5 easy steps below or watch the video that takes only a minute of your time!

Step 1: Wash your hands thoroughly with soap and apply hand sanitizer prior to handling the terminal and disinfectant wipes.

Step 2: Take a disinfectant wipe or alcohol wipe and begin by cleaning the terminal screen(s).

Step 3: Proceed to clean the entire terminal with a new wipe.

Step 4: Swipe the Card Reader Cleaner back and forth against the magstripe reader.

Step 5: Insert the Card Reader Cleaner back and forth with a new wipe in the IC Card Slot.

 Be sure to sanitize your terminals daily to minimize the spread of bacteria and germs.

 

To view video link

https://youtu.be/_v7LfAlX7-M

 



    • Related Articles

    • PAX - Active

      In this article, you will learn how to verify if PAX (Pin-pad) is active on the register. Settings Credit card service  You will see credit card service is 'Active'.
    • Franpos Magento Module Installation Guide

      Franpos Magento Module Installation Guide 1. Open Admin Panel and go to the System / Configuration 2. Click Franpos Sync Settings 3. Generate API key on https://my.franpos.com/GetAPI. Please generate API key for main location if you have several. ...
    • Reconciliation Guide for Full Kiosk

      Reconciliation guide for full kiosk. Make sure the time on kiosk and time on the back office are matching only then the reconciliation will work. Go to back office -> cash machine, select operation as prepare and type as Bill dispenser and click on ...
    • PAX - Partners & Reseller

      In this article, you will learn how to use activated PAX S300 Pin-pad device. Login to Franpos as https://reseller.franpos.com/ Search for Company on the merchant portal Fill in Merchant ID as e.g.Px:None: None.
    • PAX E700/ Q220 ACTIVATION

      PAX E700 / Q220 ACTIVATION 1. Click and Touch on the four corners of the PAX Screen in sequence showed in the Picture below. 2. Type in the password as " The Following Day Date (MM/DD/YYYY) " or if did not work type " 1234 " and click on Green Enter ...