Scan Avenger Wireless Bluetooth Scanner Setup & Use Manual

• Related Articles

• Scanner setup inside the Register App

  In this article, you will learn how to set up your USB or wireless scanner inside the Register app. By default, the barcode you scan will be inputted into the search bar in the Register. With this setup, the items will be added to the cart ...

• Franpos Wireless Scanner

  Introduction to Your Franpos Wireless Scanner 1) What Comes with the Scanner: Manual. Scanner USB-B Cable (for charging) USB Dongle 2) How to Connect: Plug the USB Dongle (item 4) into any available USB port on the back of the employee screen. 3) ...

• Enable Simple Discount or Manual Discount

  Enable Simple Discount in the Back Office and Add Manual Discount on the Register This article helps you learn how to enable "Simple Discount" in the Back office and add a Manual Discount on the Register. FYI - Simple Discount should be enabled only ...

• FRANPOS Wireless Scanner Skipping Last Digit

  1. If the wireless scanner is skipping the last digit in the bar code when trying to scan the                  products, please follow this step. 2. Scan the bar code attached below with the wireless scanner.     3. Then , please scan the bar code ...

• Socket Mobile Scanner Set-Up Guide

  Pairing Socket scanner for first time users: Power scanner on, go to Settings > Bluetooth and scan the barcode (barcode might need to be printed out) Wait until it beeps once and moves to “My Devices”. If a PIN code is requested use “0000” (4 zeros) ...