Enabling DHCP on the Franpos XP printer

Enabling DHCP on the Franpos XP printer

Connect the Franpos XP Printer to a Windows PC.

  1. Download the required archive. Google drive link 
  2. Unzip it to any folder on your computer using 7zip.
  3. Note: The password for the archive is 123.
  4. Open POS Printer Test.exe.
  5. Follow the instructions shown below:
            5.1: Click on Auto-Setup..
            5.2: Click Search to find your printer.
            5.3: Select your printer from the list.
            5.4: Check the box for Enable DHCP.
            5.5: Click Save to apply the settings.

    • Related Articles

    • Printer Settings (Inside Register Application) for Receipts Printing Gibberish Issue

      Printer Settings (Inside Register Application) for Receipts Printing Gibberish Issue In this article you will learn how to define the printer (Height/Delay) settings inside Register application in order to fix the Receipt Gibberish print issue. First ...

    • Guide for enabling DHCP on Epson TM-L90

      Guide for enabling DHCP on Epson TM-L90 Printers If your Epson printer was shipped without DHCP enabled, or if a factory reset took place, you may find that the printer can only obtain the IP address of 192.168.192.168. This guide will walk you ...

    • Receipt Printer Not Printing & Cash Drawer Not Opening On Ejeton POS

      If your Receipt Printer Is Not Printing & Cash Drawer Not Opening same time On Ejeton POS please follow these steps. 1. Please make sure there are three cables connected to your receipt printer ( Seiko II or Franpos White Receipt Printer ) a. Power ...

    • Reset Zebra Label Printer Settings to Default (ZD410/ TLP 2824 Plus)

      The label printer which is compatible with Franpos is only Zebra ZD410 . Locations who needs to purchase new label printer should go for only - Zebra ZD410. When the zebra printer stops printing labels correctly( SKU Cutting off, Name or the bar code ...

    • Ports On the Franpos Register

      Ports On the Franpos Register ( EJETON Dual Screen ) Andriod 7 / Gen 2: 1. Power - To Connect the Power Cable of the POS Machine 2. Ethernet - To Connect the Ethernet Cable ( Internet Cable ) 3. USB Ports - To Connect the Scanner etc. Android 11 / ...