Related Articles
Pax/s300 Find the IP Address
This article will show you how to find the IP Address of your Pax S300 Pin Pad Reader. If you can't see the Pax S300 in your POS and you've made sure that the device is configured properly, please go to Settings > Devices > Pin Pad Settings. In the ...
Static vs. Dynamic IP setup iCT250.
In this article, you will learn how to change the IP Address from static to dynamic on the iCT250. Press the .,#* button Enter the password Go to Setup Menu or press "3" Enter the password Go to Communications or press "2" Go to Ethernet or press ...
Star TSP100LAN printer not printing
Turn off printer Power printer back on while holding the Green FEED Button down The printer will run a Self-test after a few seconds After Self-test prints release the Green FEED Button. A Network Test will print out. Log into your iConnect POS ...
Pax S300/ICR Hardware Setup
Connecting ICR #1 to PAX #1 Go into the PAX #1 Settings to find the IP Address Select Menu/Function+1 Enter the password 1234, hit the GREEN enter button Arrow down once Select Communications Enter the password 1234, hit the GREEN enter button Arrow ...
Connecting Ingenico iCT250 to Android Register
Confirming Terminal info Step 1 Before connecting, please make sure that the device matches the following information: SDK Version: 9.26.2 OS Version: 4614 App Version: 0604 You can find out about this as follows. Press the .,#* button Enter the ...