Close Batch on PAX A35

Tap the four corners in the sequence shown in the image below.

Enter today’s date in MMDDYYYY format as the password, then click Enter.

Swipe up on the screen with your finger until you locate 'Batch Close'.

Click on Batch Close

• Related Articles

• PAX S300 Close Batch

  In this article, you will learn how to close batch using franpos and Pax s300. Hold down the blue function key while simultaneously pressing the 1 key. The terminal will prompt you to enter in the device’s password. Type in the password. ( 1234 and ...

• Pax s300 Store&Forward

  1. Introduction Terminals can store transactions in Save-And-Forward (SAF) queue when the host is not available. The Store and Forward feature--dependent on parameters that define when to store and when to upload transactions, as well as individual ...

• Pax/s300 Set Batch time

  This Article will help adjust the batch time, in case the PAX (s300) batches multiple times a day.   On your device, select:   1. Main Menu 2. Merchant settings 3. Set Batch time

• Ingenico iCT250 Manual Batch

    In this article, you will learn how to close batch using Franpos and iCT250. Press options on the Register Press "Manual batch out" Confirm popup to close the current transaction batch and settle your device On the iCT250, confirm closing this ...

• Pax S300 manually set batch time

  1. Press the menu button on the screen 2. Enter the password 3. Go to Merchant settings 4. Press arrow down 5. Select "Set batch time" 6. Enter the password 7. Choose 2. for auto batch on and enter the time (in military time) you want your device to ...