Scanner
Franpos Wireless Scanner
Introduction to Your Franpos Wireless Scanner 1) What Comes with the Scanner: Manual. Scanner USB-B Cable (for charging) USB Dongle 2) How to Connect: Plug the USB Dongle (item 4) into any available USB port on the back of the employee screen. 3) ...
Scanner connection: SOCKET S700
Scanner setup inside the Register App
In this article, you will learn how to set up your USB or wireless scanner inside the Register app. By default, the barcode you scan will be inputted into the search bar in the Register. With this setup, the items will be added to the cart ...
Scan Avenger Wireless Bluetooth Scanner Setup & Use Manual
Scan Avenger Wireless Bluetooth Scanner Setup & Use Manual Please find attached Videos on how to set up and use the wireless blue tooth scanner. https://www.youtube.com/watch?v=8WohL61jVOQ&t=65s https://www.youtube.com/watch?v=1VigCLSYOq0&t=51s ...
Socket Mobile Scanner Set-Up Guide
Pairing Socket scanner for first time users: Power scanner on, go to Settings > Bluetooth and scan the barcode (barcode might need to be printed out) Wait until it beeps once and moves to “My Devices”. If a PIN code is requested use “0000” (4 zeros) ...
OBM-6801 Barcode Reader
The OBM-6801 Barcode Reader has various configurations that can be accessed by scanning QR codes. By default, the reader is set to "Trigger Mode". To have the scanner light always be active without holding the trigger, scan this code: To have the ...
FRANPOS Wireless Scanner Skipping Last Digit
1. If the wireless scanner is skipping the last digit in the bar code when trying to scan the products, please follow this step. 2. Scan the bar code attached below with the wireless scanner. 3. Then , please scan the bar code ...