Unit of Measurement

Unit of Measurement

In this training, you will learn how to enable scale to use for your company.

  1. In your Backoffice, go to Company Settings and the Tab "Additional Settings", Scroll to the bottom and find "Enable Bundles/Prepaid packages", and Enable "Units of measurement" by selecting either US or Metrics
  2. Next, go to catalog >> Product & services, Choose a product that needs to be weighed and select one of the following and Hit save and you are done.

**Metrics**This feature is only supported on Register for Android. The select system of measurement if you are going to sell products that require weighing or other measuring at the time of sale. Make sure to select price units for each applicable product on product details page in Catalog

scale-1.png

 

    • Related Articles

    • Retail - Price embedded barcode

      In this training, you will learn how price-embedded barcodes for weight-based products works for your retail and quick service restaurant store. If you do not wish to use this feature and your SKUs start with the digit 2, please set the "Price ...
    • Selling Weighted Products

      You can sell weighted Products using Franpos. This article will help you set this up. Pre-prerequisite:- Settings > Company Settings > Change Unit of Measurement to 'US' Before you can use a scale with your register, please go to "Settings", then ...
    • How to change units on the Detecto scale

      This article describes how to switch the Detecto scale units from lb to kg: Initial Setup: 1. Enter the Setup Mode by pressing calibration switch on the back of the scale with a thin object. 2. Scale screen should display word "Type". 3. Press Unit ...
    • Cas scale set-up

      In order to use a new CAS scale with Franpos, please follow the steps below.   Change ECR type setting in CAS scale to Type 5 (image of CAS manual below): Using power switch on the side, turn the scale off, press “# or T" key on the display ...
    • Detecto scale units mismatch

      When you see the error message "Units mismatch" on your Register, please make sure to check which measurement was selected under the product.    If your scale is set to "lb", please make sure to select "lb" under the product you are trying to sell.  ...