Network port requirements for Franpos 

Network port requirements for Franpos 

The ports need to be open so no firewall is blocking when downloading the configuration on PAX and also Anydesk from the Register.

      Below are the Ports: 10009, 9120, 8582, 5939 TCP, 5939 UDP, 5938 TCP, 5938 TCP, 54440 UDP, 54441 UDP, 54442 UDP, 54443 UDP, 54444 UDP, 54445 UDP, 54446 UDP, 54447 UDP, 54448 UDP, 54449 UDP, 54450 UDP, NTP 123 UDP, NTP 123 TCP ,8080.

    • Related Articles

    • Ports On the Franpos Register

      Ports On the Franpos Register ( EJETON Dual Screen ) Andriod 7 / Gen 2: 1. Power - To Connect the Power Cable of the POS Machine 2. Ethernet - To Connect the Ethernet Cable ( Internet Cable ) 3. USB Ports - To Connect the Scanner etc. Android 11 / ...

    • Sales Methods on Franpos Pay

      Sales Methods on Franpos Pay Franpos Pay supports multiple secure ways to process sales while maintaining PCI 6 compliance and strong fraud prevention. 1) In-Person (Card Present) How it works: Customer taps, inserts (chip), or swipes the card. Why ...

    • Refund Methods on Franpos Pay

      Refund Methods on Franpos Pay Franpos Pay ensures refunds are handled with PCI 6 compliance and fraud prevention in mind. Use the methods below based on your scenario. 1) Refund via Previous Ticket (Primary Method) Requirement: The original ticket ...

    • Network printer connection

      Here are the steps to connect the network printer to the Franpos POS : 1. Turn off the printer. 2. Power the printer back on while holding down the Green FEED Button. 3. The printer will run a self-test after a few seconds. 4. After the self-test ...

    • Franpos Wireless Scanner

      Introduction to Your Franpos Wireless Scanner 1) What Comes with the Scanner: Manual. Scanner USB-B Cable (for charging) USB Dongle 2) How to Connect: Plug the USB Dongle (item 4) into any available USB port on the back of the employee screen. 3) ...